Home > Timer control board >

JY-18B coin operated USB time board with separate display time control Power Supply for USB devices

Product Categories

Neteb Arcade

Contact Now

Ask Lasest Price
Brand Name :	NETEBARCADE
Model Number :	TMB02
Certification :	NONE
Price :	USD13
Payment Terms :	T/T, Western Union, MoneyGram,PAYPAL
Supply Ability :	500 pieces per week
Delivery Time :	3-5 working days

Add to Cart

- Free to set up time, value, given time, time for warning sound, and coin and memory mode.

- Controls up to 2 sets of USB device.

Input Voltage	DC+12V
Standby	Display shows:00:00, rely: Normal Open (NO)
Accumulated time	Yes, add time if receive signals again when time is running
Device input	2 set USB connector
Output	2 set USB connector
How it works
Mode 1	Time runs down after receive signals-> Display shows remaining time and supply power to device-> it cuts off power after time runs out
Mode 2 (Connect a button)	Display shows remaining time after receive signals-> push button start-> time runs down and supply power to device-> it cuts off power after time runs out
Pause (connect a button)	Push button pause: it cuts off power when pause, display shows remaining time. Re-supply power after push button pause again
Price/time setting	Please reference to page 2
Operating Mode	Please reference to page 3

Connection and Position

JY-18B coin operated USB time board with separate display time control Power Supply for USB devices

Setting

Please follow CODE ON DISPLAY and use button "S1" and "S2" to set up number

Please press button "S4". “B” flashes. Please set up INPUT SIGNAL QUANTITY to active device (01-50).
Please press button "S4", “A” flashes. Please set up TIME (01-99).
Please press button "S4", “B” flashes. Please set up TIME (01-99).
Please press button “S4” 4 TIMES.
Please set up TIME for Warning Sound.
Please press button "S4" to finish.

GIVEN TIME: Add time by free if input signals reach SETTING RATE during time is running.
Example Setting: input signal to active device: 01, input signals for given time: 03 give time: 02:10
Add time “02:10” free if receive “3 signals” during time is running.

Please press button "S4" 4 TIMES. “B” flashes. Please set up RATE OF INPUT SIGNAL QUANTITY.
Please press button "S4", “A” flashes. Please set up GIVEN TIME.
Please press button "S4", “B” flashes. Please set up GIVEN TIME.
Please press button "S4" to finish.

Please follow table to set up operating function:

Please hold on button "S1" and "S2" simultaneously for 3 seconds to get into MODE SETTING.
Please use button "S1" and button "S2" to set up number for CODE
Please press button "S4" to switch to next code

Function	Code on Display		Description
	A	B
Running Time	01	01	Time runs down without pressing button
		02	Time runs down by pressing button
Time Type	02	03	MINUTE: SECOND
		04	HOUR: MINUTE
Memory	03	05	Yes: Remaining time keep running after power off and on
		06	No: Standby power off and on
Back to standby	04	1-30	user has no action after push buttons or receive signals in setting time
Default: 01-03: Bold and base line. 04: not use the function.

Size and Connection Example

JY-18B coin operated USB time board with separate display time control Power Supply for USB devices

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Neteb Arcade
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Timer control board products from this supplier

Find Similar Products By Category:

Electronic Components & Supplies

Hot Searches: